APL: 662 2/5/2019
- Category: Approved Products List Sign Support AccessoriesNCHRP-350 Approved Devices
- Effective Date: 2/5/19
| Manufacturer | Product | Lab Approval Number |
|---|---|---|
| Dent Breakaway Industries | 1/2-inch Breakaway Bolt with 0.380 break-point (See Notes 1, 2, 3, and 4) | 1462428 |
| Dent Breakaway Industries | 5/8-inch Breakaway Bolt with 0.380 break-point (See Notes 1, 4, and 5) | 1462429 |
| Manufacturer | Product | Lab Approval Number |
|---|---|---|
| Nucor Steel Marion, Inc. | Slip Safe Supreme (See Notes 1, 6, and 7) | 1462430 |
| Manufacturer | Product | Lab Approval Number |
|---|---|---|
| Xcessories Squared | Surface Mount Kleen Break Assembly (See Notes 1, 8, & 9) | 1462431 |
| Manufacturer | Product | Lab Approval Number |
|---|---|---|
| Xcessories Squared | SCBM175-250-G Concrete Barrier Mount Bracket (See Note 9) | 1462432 |
| Xcessories Squared | ICBM4510-200-G (See Note 9) | 1462433 |
| Manufacturer | Product | Lab Approval Number |
|---|---|---|
| Xcessories Squared | FCB175‐250‐G Flat Concrete Base (See Note 9) | 1462434 |
| Xcessories Squared | ICBM4510-200-G (See Note 9) | 1462435 |
Notes and Remarks:
- 1 - NCHRP-350 approved. Test Levels 1, 2, and 3
- 2 - For use with S4x7.7 Steel Beam supports, with up to two supports within a seven foot width.
- 3 - For inclined slip bases, it is recommended that the bottom shank length be 1-1/4-inch due to limited clearance for installation.
- 4 - Standard flat washers and hex nuts as shown on the Steel Beam support Standard Detail, and as specified in the Standard Specifications, may be used with this device.
- 5 - For use with W6x12 Steel Beam supports, with up to two supports within a seven foot width.
- 6 - For use with 6-lb/ft back to back u-channel supports, with up to two supports within a seven foot width.
- 7 - For use only with u-channel supports manufactured by Nucor Steel Marion.
- 8 - For use with 2.00-in x 14 ga square tube supports meeting the requirements of the Standard Specifications, with up to three supports within a seven foot width.
- 9 - Anchors shall be those supplied by the device manufacturer.
