Skip to main content
An Official West Virginia Government Website
New River Gorge Bridge

APL: 662 7/8/2025

  • Category: Approved Products List Sign Support AccessoriesNCHRP-350 Approved Devices
  • Effective Date: 7/8/25
Omni-Directional Breakaway Devices (709.52)
ManufacturerProductLab Number
Dent Breakaway Industries1/2-inch Breakaway Bolt with 0.380 break-point (See Notes 1, 2, 3, and 4)1462428
Dent Breakaway Industries5/8-inch Breakaway Bolt with 0.380 break-point (See Notes 1, 4, and 5)1462429
Back to Back U-Channel Breakaway Devices (709.54)
ManufacturerProductLab Number
Nucor Steel Marion, Inc.Slip Safe Supreme (See Notes 1, 6, and 7)1462430
Surface Mount Breakaway Devices (709.51)
ManufacturerProductLab Number
Xcessories SquaredSurface Mount Kleen Break Assembly (See Notes 1, 8, & 9)1462431
Type A Barrier Wall Sign Support Brackets (709.55)
ManufacturerProductLab Number
Xcessories SquaredSCBM175-250-G Concrete Barrier Mount Bracket (See Note 9)1462432
Xcessories SquaredICBM4510-200-G (See Note 9)1462433
Type B Barrier Wall Sign Support Brackets (709.55)
ManufacturerProductLab Number
Xcessories SquaredFCB175‐250‐G Flat Concrete Base (See Note 9)1462434
Xcessories SquaredICBM4510-200-G (See Note 9)1462435

Notes and Remarks:

  1. 1 - NCHRP-350 approved. Test Levels 1, 2, and 3
  2. 2 - For use with S4x7.7 Steel Beam supports, with up to two supports within a seven foot width.
  3. 3 - For inclined slip bases, it is recommended that the bottom shank length be 1-1/4-inch due to limited clearance for installation.
  4. 4 - Standard flat washers and hex nuts as shown on the Steel Beam support Standard Detail, and as specified in the Standard Specifications, may be used with this device.
  5. 5 - For use with W6x12 Steel Beam supports, with up to two supports within a seven foot width.
  6. 6 - For use with 6-lb/ft back to back u-channel supports, with up to two supports within a seven foot width.
  7. 7 - For use only with u-channel supports manufactured by Nucor Steel Marion.
  8. 8 - For use with 2.00-in x 14 ga square tube supports meeting the requirements of the Standard Specifications, with up to three supports within a seven foot width.
  9. 9 - Anchors shall be those supplied by the device manufacturer.