Department of Transportation

MP-400s

It is important to perform all procedures associated with sampling, testing, reporting, and inspection appropriately in order to maintain a reliable quality assurance system. This is accomplished by use of Division approved Material Procedures (MP’s). The following is a list of MP’s currently used by WVDOH.

This page is organized by MP Number

100 | 200 | 300 | 400 | 500 | 600 | 700 | Other

401.02.21 

Calibration of Thermometer and Pyrometer at Bituminous Concrete Mixing Plant (Replaced ML-11) 

January 1995 

401.02.22

Design Testing of Hot-Mix Asphalt 

May 2011

401.02.24 

Guide To Designing Hot-Mix Asphalt with Recycled Asphalt Pavement 

January 1998 

401.02.25 

Certification of Asphalt and Tar Shipping Terminals 

March 2000 

401.02.27 

Guide for Contractors Quality Control of Hot-Mix Asphalt 

March 2000 

401.02.28

Guide to Designing Hot-Mix Asphalt Using Superpave Volumetric Design 

May 2011

401.02.29 

Guideline for Quality Control and Acceptance Requirements for Superpave Hot-Mix Asphalt 

March 2000

401.02.31 Guide For Quality Control and Acceptance Requirements For Asphalt Mixtures On Specified Interstate and Expressway Projects September
2018

401.03.50 

Guide for Contractor's Quality Control of Bituminous Concrete 

March 2000 

401.05.20 

Compaction Testing of Hot-Mix Asphalt Pavement 

March 2000 

401.07.20 PWL - Sampling Loose Asphaltic Mixtures from the Roadway September 2018
401.07.21 PWL - Sampling Compacted Asphaltic Mixtures from the Roadway September 2018 
401.07.22  PWL - Standard Method of Measurement for Thickness of Asphalt Pavement Using Drilled Cores September 2018  
401.07.23 PWL -  Guide to Determining Interface Bond Shear Strength of Multi-layered Asphalt Pavement Specimens September 2018   
401.07.24 PWL - Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique September 2018  
401.07.25 PWL - Guide for Evaluation of Asphalt Pavements with Substandard Properties September 2018   
401.13.50 PWL - Guide to Statistical Analysis of Material Using Quality Level Analysis – Percent Within Limits September 2018   

402.02.20 

Rapid Determination of the Polish Susceptible Carbonate Particle Content in Aggregates 

January 1995 

403.01.50 

Procedure for Determining a Reduced Unit Price To Be Paid for Penetration Macadam Which Does Not Conform to the Grading Requirements of Governing Specifications 

January 1995